Exmark Frontrunner Operating Manual Download Page 24 | Manualshive

Page: 24 / 52

background image

19

3.4 TRANSPORTING

IMPORTANT:

Do not transport FrontRunner tractor without an approved Exmark front

mount attachment.

3.4.1 Transporting a Unit: Use a heavy-duty trailer or truck to transport the machine.

Engage the park brake and block the wheels. Securely fasten the machine to the
trailer or truck with straps, chains, cable, or ropes. Be sure that the trailer or truck has
all necessary lighting and marking as required by law. Secure the trailer with a safety
chain.

CAUTION

POTENTIAL HAZARD

♦

This unit does not have proper turn

signals, lights, reflective markings, or a
slow moving vehicle emblem. These
items are required to drive on a public
street or roadway.

WHAT CAN HAPPEN

♦

Driving on a street or roadway without

such equipment is dangerous and can
lead to accidents causing personal injury.

♦

Driving on a street or roadway without

such equipment may also be a violation of
State laws and the operator may be
subject to traffic tickets and/or fines.

HOW TO AVOID THE HAZARD

♦

Do not drive a unit on a public street or

roadway.

«
...
22
23
24
25
26
...
»

Summary of Contents for Frontrunner





















































Reviews:

No comments

Related manuals for Frontrunner

Brand: Walker Pages: 60

Brand: Easymate Pages: 14

ULTRAVAC E Series

Brand: Exmark Pages: 9

Brand: Poulan Pro Pages: 48

Brand: Toro Pages: 28

Brand: Worx Nitro Pages: 75

Brand: Ayce Pages: 118

Brand: Toro Pages: 2

Brand: IDS Pages: 34

Brand: Alamo Pages: 110

Brand: Dixon Pages: 13

Smart Speed 569

Brand: Troy-Bilt Pages: 20

DR Field and Brush Mower

Brand: Country Home Products Pages: 31

Brand: Murray Pages: 18

Brand: Walker Pages: 88

Brand: Gartenmeister Pages: 52

LF 4677 Turbo 67963

Brand: Jacobsen Pages: 118

Brand: Jacobsen Pages: 236

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands