background image

Conditions and Products Covered

Exmark Mfg. Co. Inc. and its affiliate, Exmark Warranty 
Company, pursuant to an agreement between them, jointly 
warrant on the terms and conditions herein, that we will repair, 
replace or adjust any part manufactured by Exmark and found 
by us (in the exercise of our reasonable discretion) to be 
defective in factory materials or workmanship for a period of 
two years.

This warranty applies to Exmark turf equipment purchased on 
or after October 1, 2004 sold in the US or Canada. This 
warranty may only be assigned or transferred to a second (or 
third) owner by an authorized Exmark dealer. The warranty 
period commences upon the date of the original retail 
purchase.

Products

Warranty Period

• All Products (except as noted below)

2 years

• All Attachments and Accessories

1 year

• Metro 21 and Metro 26 Series 

1 year

• Belts and Tires

90 days

• Battery

1 Year Prorated

• Engine*

Warranty is covered by engine manufacturer

* Please refer to the engine manufacturer’s warranty statement 
that is included in the literature packet. We are not authorized 
to handle warranty adjustments on engines.

This warranty only includes the cost of parts and labor.

Items and Conditions Not Covered

This warranty does not cover the following:
• Pickup and delivery charges to and from any authorized 

Exmark Service Dealer beyond first warrantable service.

• Any damage or deterioration due to normal use, wear and 

tear, or exposure.

• Cost of regular maintenance service or parts, such as filters, 

fuel, lubricants, tune-up parts, and adjustments.

• Any product or part which has been altered or misused or 

required replacement or repair due to normal wear, 
accidents, or lack of proper maintenance.

• Any repairs necessary due to use of parts, accessories or 

supplies, including gasoline, oil or lubricants, incompatible 
with the turf equipment or other than as recommended in 
the operator's manual or other operational instructions 
provided by Exmark.

There are no other express warranties except for engine and 
special emission system coverage stated elsewhere herein or 
included with the product.

All warranty work must be performed by an authorized 
Exmark Service Dealer using Exmark approved replacement 
parts.

Instructions for Obtaining Warranty Service

The product must be registered with original proof of purchase 
by an Exmark Service Dealer before obtaining any warranty 
service.

Contact any Exmark Service Dealer to arrange service at their 
dealership. To locate a dealer convenient to you, access our 
website at www.exmark.com. U.S. Customers may also call 
402-223-6375.

If for any reason you are dissatisfied with the Service Dealer’s 
analysis or with the assistance provided, contact us at:

Exmark Customer Service Department
The Exmark Warranty Company
2101 Ashland Avenue
Beatrice, NE 68310
402-223-6375 or
[email protected]

Owner’s Responsibilities

The Exmark turf equipment, including any defective part, 
must be returned to an authorized Exmark service dealer 
within the warranty period. This warranty extends only to turf 
equipment operated under normal conditions. You must read 
the operator’s manual. You must also properly service and 
maintain your Exmark product as described in the operator’s 
manual. Such routine maintenance, whether performed by a 
dealer or by you, is at your expense.

General Conditions

The sole liability of Exmark and Exmark Warranty Company 
with respect to this warranty shall be repair and replacement 
of defective components as set forth herein. 

Neither Exmark 

nor Exmark Warranty Company shall have any liability 
for any other cost, loss or damage, including but not 
limited to, any incidental or consequential loss or damage.

In particular, we shall have no liability or responsibility for:
• Expenses related to gasoline, oil or lubricants.
• Travel time, overtime, after hours time or other 

extraordinary repair charges or charge relating to repairs or 
replacements outside of normal business hours at the place 
of business of the authorized Exmark Service Dealer. 

• Rental of like or similar replacement equipment during the 

period of any warranty, repair or replacement work.

• Any telephone or telegram charges or travel charges.
• Loss or damage to person or property other than that 

covered by the terms of this warranty.

• Any claims for lost revenue, lost profit or additional cost as 

a result of a claim of breach of warranty.

• Attorney's fees.

No Claim of breach of warranty shall be cause for cancellation 
or rescission of the contract of sale of any Exmark mower.

Some states do not allow exclusions of incidental or 
consequential damages, so the above exclusions and 
limitations may not apply to you.

This warranty gives you specific legal rights, and you may 
also have other rights which vary from state to state.

2-Year Limited Warranty

Exmark Turf Equipment

(For units purchased on or after October 1, 2004)

G006117

23

Summary of Contents for FontRunner FR524





























Reviews: