background image

COMMERCIAL

®

21

Setup Instructions

For Serial Nos. 850,000 & Higher

Loose Parts

Use the chart below to verify that all parts have been shipped. Part numbers not shown are available on the dealer
extranet.

Dealer Pack

Part #

Description

Qty.

Use

614249

Wire Ties

2

Positioning the cables on the handle
bar.

Warranty Registration Reminder

Fill out the online warranty registration
form.

Literature Pack

Part #

Description

Qty.

Use

Manual, Operator’s

1

Read before operating the machine.

Manual, Engine Operator’s

1

For Units with Honda Engines

Manual, Engine Operator’s

1

For Units with Kawasaki Engines

© 2009—Exmark Mfg. Co., Inc.
P.O. Box 808
Beatrice, NE 68310

Part No. 4500-494 Rev. A

Printed in the USA

All Rights Reserved

Summary of Contents for COMMERCIAL 21 EC21KAY

Page 1: ...ies 2 Positioning the cables on the handle bar Warranty Registration Reminder Fill out the online warranty registration form Literature Pack Part Description Qty Use Manual Operator s 1 Read before operating the machine Manual Engine Operator s 1 For Units with Honda Engines Manual Engine Operator s 1 For Units with Kawasaki Engines 2009 Exmark Mfg Co Inc P O Box 808 Beatrice NE 68310 Part No 4500...

Page 2: ...in the handle bracket Installing and Routing the Cables 1 Remove the drive brake cable assembly mounting hardware from the handle 2 Route the cables of the drive brake cable assembly on the handle as shown in Figure 1 and Figure 2 Figure 2 1 Engine brake blade control bail 2 Handle 3 Drive bail Self Propelled Units Only 4 Cable end 5 Mounting hardware 6 Drive Brake cable assembly 7 Wire tie 3 Hook...

Page 3: ...Slide the end of the fuel line onto the elbow fitting 6 Secure the fuel line in place with the fuel line clamp Service the Engine Important The mower does not come with oil in the engine Filling the crankcase with oil For units with Honda Engines The engine crankcase can hold 22 ounces 0 65 liters of oil Use only high quality SAE 10W 30 weight detergent oil that has the American Petroleum Institut...

Page 4: ...gure 7 Figure 7 1 Bag 4 Handle bracket notch 2 Handle 5 Rear door 3 Bag frame 6 Lower 4 Once the bag is seated lower the rear door onto the bag Attaching the Product Banner If provided tie wrap the product banner to the handle as shown in Figure 8 Figure 8 1 Tie wrap 2 Product banner Check the Cable Adjustments Follow the procedures in the manuals to ensure the self propel drive and BBC cables hav...

Reviews: