Exmark BRS270CKC36000 Operator'S Manual Download Page 29

Conditions and Products Covered

Exmark Mfg. Co. Inc. and its affiliate, Exmark Warranty 
Company, pursuant to an agreement between them, jointly 
warrant on the terms and conditions herein, that we will repair, 
replace or adjust any part on these products and found by us 
(in the exercise of our reasonable discretion) to be defective in 
factory materials or workmanship for a period of one year.

This warranty applies to Exmark commercial equipment sold 
in the U.S. or Canada. This warranty may only be assigned or 
transferred to a second (or third) owner by an authorized 
Exmark dealer. The warranty period commences upon the date 
of the original retail purchase.

Warranty Exceptions

Warranty Period

• Bags, Belts and Tires

90 days

• Battery

1 Year Prorated

• Engine

*

* The Engine warranty is covered by the engine manufacturer.  
Please refer to the engine manufacturer’s warranty statement 
that is included in the literature packet.

This warranty only includes the cost of parts and labor.

Items and Conditions Not Covered

This warranty does not cover the following:
• Pickup and delivery charges to and from any authorized 

Exmark Service Dealer.

• Any damage or deterioration due to normal use, wear and 

tear, or exposure including standard service items such as 
blades, brushes, cutting teeth, tines, bushings, bearings, 
chains, or sprockets.

• Cost of regular maintenance service or parts, such as filters, 

fuel, lubricants, tune-up parts, and adjustments.

• Any product or part which has been altered or misused or 

required replacement or repair due to normal wear, 
accidents, or lack of proper maintenance as set forth in the 
maintenance section of the operator’s manual.

• Any repairs necessary due to use of parts, accessories or 

supplies, including gasoline, oil or lubricants, incompatible 
with the equipment or other than as recommended in 
the operator's manual or other operational instructions 
provided by Exmark.

There are no other express warranties except for engine and 
special emission system coverage.

All warranty work must be performed by an authorized 
Exmark Service Dealer using Exmark approved replacement 
parts.

Instructions for Obtaining Warranty Service

The product must be registered with original proof of purchase 
by an Exmark Service Dealer before obtaining any warranty 
service.

Contact any Exmark Service Dealer to arrange service at their 
dealership. To locate a dealer convenient to you, access our 
website at www.exmark.com. U.S. or Canada customers may 
also call 402-223-6375.

If for any reason you are dissatisfied with the Service Dealer’s 
analysis or with the assistance provided, contact us at:

Exmark Customer Service Department
The Exmark Warranty Company
2101 Ashland Avenue
Beatrice, NE 68310
402-223-6375 or
[email protected]

Owner’s Responsibilities

If your product requires warranty service it must be returned 
to an authorized Exmark service dealer within the warranty 
period. This warranty extends only to equipment operated 
under normal conditions. You must read the operator’s 
manual. You must also properly service and maintain your 
Exmark product as described in the operator’s manual. Such 
routine maintenance, whether performed by a dealer or by 
you, is at your expense.

General Conditions

The sole liability of Exmark and Exmark Warranty Company 
with respect to this warranty shall be repair or replacement of 
defective components as set forth herein. 

Neither Exmark 

nor Exmark Warranty Company shall be liable for any 
incidental or consequential loss or damage.

Such damages include but are not limited to:
• Expenses related to gasoline, oil or lubricants.
• Travel time, overtime, after hours time or other 

extraordinary repair charges or charges relating to repairs or 
replacements outside of normal business hours at the place 
of business of the authorized Exmark Service Dealer. 

• Rental of like or similar replacement equipment during the 

period of any warranty, repair or replacement work.

• Any telephone or telegram charges or travel charges.
• Loss or damage to person or property other than that 

covered by the terms of this warranty.

• Any claims for lost revenue, lost profit or additional cost as 

a result of a claim of breach of warranty.

• Attorney's fees.

No Claim of breach of warranty shall be cause for cancellation 
or rescission of the contract of sale of any Exmark machine.

All implied warranties of merchantability (that the 
product is fit for ordinary use) and fitness for use (that the 
product is fit for a particular purpose) are limited to the 
duration of the express warranty.

Some states do not allow exclusions of incidental or 
consequential damages, or limitations on how long an 
implied warranty lasts, so the above exclusions and 
limitations may not apply to you.

This warranty gives you specific legal rights, and you may 
also have other rights which vary from state to state.

Exmark Commercial Equipment

1 Year Limited Warranty

G4500-426_F

29

 

Summary of Contents for BRS270CKC36000

































Reviews: