Setup
g213882
Figure 9
1.
Spreader harness
2.
Accessory plug
3.
Battery
4.
Positive battery terminal
5.
Spreader harness positive battery connection
6.
Spreader harness negative battery connection
7.
Negative battery terminal
5.
Remove and retain the nut and screw from the
positive terminal on the battery. Install the
accessory harness positive cable (second to last
terminal ring–see Figure 9) and the positive cable
of the main harness to the front of the positive
battery terminal and secure with the nut and
screw. Repeat for negative battery cable.
6.
Use the edge clip to secure the harness to the RH
aerator panel.
7.
Use the remaining zip ties to secure the harness
to the frame and/or control cable.
On 24 inch models, secure the cable and harness
to the return-to-up spring mount on the frame.
g253773
Figure 10
1.
Secure to frame
6
Installing the Cover
Parts needed for this procedure:
Procedure
1.
Attach the cover to the hopper, in two places, by
inserting 1/4–20 x 3/4 inch machine hex screw
and washer through the cover tab grommet and
hopper as shown in Figure 11.
13
