Safety
WARNING
There is no rollover protection when the roll
bar is down. Wheels dropping over edges,
ditches, steep banks, or water can cause
rollovers, which may result in serious injury,
death or drowning.
•
Keep the roll bar in the raised and locked
position and use seat belt.
•
Lower the roll bar only when absolutely
necessary.
•
Do Not wear seat belt when the roll bar
is down.
•
Drive slowly and carefully.
•
Raise the roll bar as soon as clearance
permits.
•
Check carefully for overhead clearances (i.e.
branches, doorways, and electrical wires) before
driving under any objects and Do Not contact
them.
•
In the event of a rollover, take the unit to an
Authorized Service Dealer to have the ROPS
inspected.
Maintenance and Storage
•
Disengage drives, lower implement, set parking
brake, stop engine and remove key or disconnect
spark plug wire. Wait for all movement to stop
before adjusting, cleaning or repairing.
•
Keep engine and engine area free from
accumulation of grass, leaves, excessive grease
or oil, and other debris which can accumulate
in these areas. These materials can become
combustible and may result in a fire.
•
Let engine cool before storing and Do Not store
near flame or any enclosed area where open pilot
lights or heat appliances are present.
•
Shut off fuel while storing or transporting. Do
Not store fuel near flames or drain indoors.
•
Park machine on level ground. Never allow
untrained personnel to service machine.
•
Use jack stands to support components when
required.
•
Carefully release pressure from components with
stored energy.
•
Disconnect battery or remove spark plug wire
before making any repairs. Disconnect the
negative terminal first and the positive last.
Reconnect positive first and negative last.
•
Use care when checking blades. Wrap the blade(s)
or wear gloves, and use caution when servicing
them. Only replace damaged blades. Never
straighten or weld them.
•
Keep hands and feet away from moving parts.
If possible, Do Not make adjustments with the
engine running.
•
Charge batteries in an open well ventilated area,
away from spark and flames. Unplug charger
before connecting or disconnecting from battery.
Wear protective clothing and use insulated tools.
•
Keep all guards, shields and all safety devices in
place and in safe working condition.
•
Check all bolts frequently to maintain proper
tightness.
•
Frequently check for worn or deteriorating
components that could create a hazard.
•
All replacement parts must be the same as
or equivalent to the parts supplied as original
equipment.
WARNING
Hydraulic fluid escaping under pressure
can penetrate skin and cause injury. Fluid
accidentally injected into the skin must be
surgically removed within a few hours by a
doctor familiar with this form of injury or
gangrene may result.
•
Keep body and hands away from pinhole
leaks or nozzles that eject high pressure
hydraulic fluid.
•
Use cardboard or paper, not your hands,
to find hydraulic leaks.
•
Safely relieve all pressure in the hydraulic
system by placing the motion control
levers in neutral and shutting off the
engine before performing any work on
the hydraulic system.
9
Summary of Contents for 000 & Higher
