background image

Product Introduction

Working Principle

1

The MC-HT5 1 microcomputer ceramic hob directly employs
resistance wire heating, and realizes power regulation with the microcomputer
controlling different heating time and closing time of the resistance wire.

High temperature protection

The temperature sensor mounted on the radiant electric the temperature
inside the cooker from time to time. When an excessive temperature is
detected, the cooking plate will be directly disconnected and stop power
output.

Safety

Dear customer,

Thank you for purchasing the our ceramic hob.

Our product can serve you many years to your satisfaction.

Please read this instructions manual carefully before using and installation.

Keep it in a good place after reading for future reference.

Thank you again for your purchase of our  ceramic hob, and wish

you to enjoy the pleasure brought about by it.

The MC-HT5 1  microcomputer  ceramic  hob can meet dif ferent
kinds of cuisine demands because of resistance wire heating, micro-
computerized control and multi-power selection, really the optimal choice
for modern families.
The  ceramic hob centers on customers and adopts personalized
design. The hob has safe and reliable performances, making your life
comfortable and enabling to fully enjoy the pleasure from life.

Summary of Contents for MC-HT571












Reviews: