Exibel KW-64MP3USB, Instruction Manual

Page: 11 / 40

EN
G
LI
SH
11
10. Troubleshooting
In case of errors, check the following things before the device is sent in for repair.
Do not open the device due to electrical shock hazards. Contact customer services
or a store if you cannot solve the problem by following the advice below.
WARNING!
Do not under any circumstances try and repair the device on your own because it will
terminate your warranty.
Problem Cause Solution
No sound/
No voltage. The volume is not
adjusted. Adjust the volume.
The cable is not
connected correctly. Check the cables connection.
The batteries are low or
not correctly inserted. Check the batteries.
No disc indication. No CD is inserted. Insert a CD, CD-R eller CD-RW.
The CD disc is
scratched or dirty. Change or clean the disc.
See instructions for care.
The laser lens is misty. Wait until the lens has become
adjusted to the room’s temperature.
The CD-R disc is empty
or the copying has not
finished. Use a copied CD-R.
Playing of the CD
does not work. The CD disc is scrat-
ched or dirty. Change or clean the disc.
The laser lens is misty. Wait until the lens has
become adjusted to the room’s
temperature.
Ett program is activated. Deactivate the programme.
MP3 files cannot
be played. The CD contains faulty
MP3 files. Control the CD contains
MP3 files.
It is not possible
to play from USB
memory. The USB is not inserted
correctly. Remove and insert
the memory again.
The memory does not
contain valid MP3 files. Check the USB memory.