Exibel KW-102MP3US, Manual

Page: 8 / 60

8
EN
G
LI
SH
Installation
Speakers
Connect the speakers to the outlet SPEAKERS on the back of the device.
Connect the right speaker to the outlet marked R and the left speaker to the
outlet marked L .
Mains connection
Connect the mains cord to a wall socket. Check that the voltage (V) which is shown
in the marking table on the back of the device is the same as in your local electrical
network (230 V AC, 50 Hz). Get advice from the retailer or at a place of service if it
is not the same.
To completely shut off the power: Pull out the plug from the wall socket. Also pull
out the plug from the wall socket during strong thunder storms to protect the device.
Setting the clock
The clock can only be set when the stereo is in Stand-By mode.
1. Press [STAND BY] (2) on the main device (not on the remote control) to return
to Stand-By mode.
2. Press and hold [CLOCK/MEMORY] (7) on the main device for 3 seconds,
--:--
blinks in the display.
3. Press [

] or [

] to choose between 12 or 24 hour display. Confirm by pushing
[CLOCK/MEMORY].
4. Press repeatedly [

] or [

] to set hours. Confirm with [CLOCK/MEMORY].
5. Press repeatedly [

] or [

] to set minutes. Push [CLOCK/MEMORY] to save
settings.
6. Press [STAND BY] (2) on the main device to exit Stand-By mode.