EN
G
LI
SH
5
Getting started
1. Plug the DC connector on the mains lead into the power socket on the back of
the radio.
2. Plug the other end of mains lead into a wall socket.
3. Your radio will display a brief welcome message and then automatically tune into
all the available DAB stations.
4. The radio will then display the number of DAB stations found. If there are no DAB
stations in your area, the display will show “SIG N/A”. All the available stations will
be saved for future use.
5. You can toggle between DAB and FM mode using the [ DAB/FM ] button.
Note:
• If you move the radio to a new location, you can search for new stations.
Press [ SCAN ] to search.
• You may need to reposition the aerial for optimum reception.
Operation
Turn the radio on using the [ STANDBY ] button.
Listening to the FM radio
1. Select
FM
by pressing the [ DAB/FM ] button.
2. Select the desired frequency by pressing and holding the [
◄◄
] or [
►►
] button
to search up or down.
3. Fine tuning can be done by pressing the [
◄◄
] or [
►►
] button once and
repeating until the desired frequency is found.
4. Alternatively, if you press the [ SCAN ] button it will automatically seek out the next
available station. Press and hold in [ SCAN ] to search in the opposite direction.
Listening to the DAB radio
1. Press the [ DAB/FM ] button and the radio will automatically search for all
the available DAB stations. If you wish to fine tune a DAB station or search for new
stations, press the [ SCAN ] button.
2. Press the [ SCAN ] button to activate the quick scan; the display will show “Q SCAN”.
3. Press and hold in the [ SCAN ] button to activate the full scan; the display will show
“F SCAN”.
4. Change station by pressing the [
◄◄
] or [
►►
] button.
DAB station search
In the DAB mode, press and hold in the [ SELECT ] button for over two seconds
to come to the “AUTO ON/OFF” mode. Press and hold in the [ SELECT ] button
repeatedly to toggle between the
AUTO ON
and
AUTO OFF
modes.