4
En
gl
is
h
Assembly and setup
Dust cover
Slot the tabs on the back edge of the dust cover
into the hinges and press all the way down.
Turntable
1. Fit the drive belt onto the flange
on the bottom of the turntable (1).
Make sure that the drive belt is
not twisted.
2. Place the turntable onto the centre
spindle.
3. Lift the drive belt over the drive pulley.
4. Place the felt mat onto the turntable.
Phono cartridge
1. Fit the end of the phono cartridge
into the end of the tonearm (9).
2. Secure the cartridge in place using
the locking collar.
