8
En
gl
is
h
socket must be disconnected if the RCA input is to work.
2. Switch the speaker on.
3. Press [ AUDIO ] (32) on the remote control or press [
] (4) on the speaker until
“AUdIO” shows in the display. Start playback on the external audio device.
4. Set the desired volume, bass and treble levels on your external device and on
the speaker. Other playback settings should be controlled from the external device.
Playback from an external device via Bluetooth
1. Switch the speaker on.
2. Press [ ] (26) on the remote control or press [
] (4) on the speaker until “-bt-”
shows in the display. A blue LED will flash to indicate that the speaker is detectable
for pairing with other Bluetooth devices.
3. Activate Bluetooth on the device to be paired with the speaker.
4. The speaker will appear on your device as
BTX1350
. Select this as the device to
be connected.
5. Once connection has been established the flashing blue LED will become a steady blue.
6. Start playback on your device. Set the desired volume, bass and treble levels on
your external device and on the speaker.
Note:
If you are prompted to enter a PIN code on your device, you should enter
0000
(four zeroes). Certain devices may also require you to approve the connection.
Care and maintenance
• Unplug the mains lead from the wall socket and remove the batteries from
the remote control if the speaker is not to be used for an extended period.
• Clean the product by wiping it with a dry cloth.
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner. When
recycling your product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is disposed of in
an environmentally sound manner.
1. Connect your external device to
the AUDIO 1 and/or AUDIO 2 input/s.
Note:
If devices are connected to both
inputs, the 3.5 mm input will be prioritised.
The cable connected to the 3.5 mm
Connecting external devices to AUDIO IN