11
Eng
lis
h
Settings
FM
Press [ IN ] (2) or [ INPUT ] (16) the required number of
times until FM appears. Press MENU (22) to select menu
settings: Auto scan (automatic channel search) – Scan
setting – Audio setting – System.
1. Press [ IN ] (2) or [ INPUT ] (16) the required number of
times until “FM” appears on the display.
2. The tuner will start from the lowest tuner frequency
the first time the FM radio is used.
Setting radio stations
Manual search:
Press [ I
◄◄
] (17)/(5) or [
►►
I ] (23)/(6)
to search for a station manually.
Automatic search:
Hold in one of the buttons [ I
◄◄
] (17)/(5)
or [
►►
I ] (23)/(6) for about 3 seconds to activate automatic
station scan. Press [ MENU ] (22) to enter the settings menu.
Press [ I
◄◄
] (17) or [
►►
I ] (23) to select the desired function:
•
Auto scan
– automatic station search.
•
Scan setting
– selects the type of stations to be
searched for: All stations – Strong stations only.
•
Audio setting
– Forced mono (forced mono during
poor reception) – Stereo allowed (stereo allowed even
during poor reception).
•
System
– Factory reset – SW version (current software
version).
Press [ ENTER ] (24) to confirm your selection.
Saving radio stations to the memory presets
You can save up to 20 radio stations presets.
A. Using Auto scan. All detected stations will then be
saved to the presets.
B. Using manual scan.
Make sure that the radio station (frequency) you wish to
save shows on the display. Saving station presets:
1. Hold in [
►II
] (25) for about 5 sec until “Preset Store”
appears on the display.
2. Select a preset slot (1–20) to save the station in with
[ I
◄◄
] (17)/(5) or [
►►
I ] (23)/(6).
3. Press [ ENTER ] (24) to confirm your selection.
“Preset X stored” will appear in the display once
the channel is saved.
