![background image](http://html1.mh-extra.com/html/exibel/41-1734/41-1734_manual_2450276005.webp)
5
En
gl
is
h
To reset the shredder after the overload safety cut-off has tripped:
1. Unplug the shredder from the wall socket and let it cool down. Clear the blades of any paper
remnants.
2. Plug the shredder back into the wall socket, wait until the indicator light shines green and then
slide the switch to REV. Excess paper remnants will exit through the feed opening. Unplug
the shredder and remove any paper remnants from the blades.
3. Set the switch to AUTO.
Care and maintenance
• Always unplug the shredder from the wall socket before cleaning.
• Feed sheets of lubrication paper (Clas Ohlson art.no 36–4038) into the shredder at regular
intervals to keep the machine running smoothly.
• Clean the shredder by wiping it with a dry cloth.
• Clear the blades from paper remnants using a sharp object.
• Empty the waste bin regularly. A full waste bin can contribute to diminished shredder performance.
Responsible disposal
This symbol indicates that this product should not be disposed of with general household waste.
This applies throughout the entire EU. In order to prevent any harm to the environment or health
hazards caused by incorrect waste disposal, the product must be handed in for
recycling so that the material can be disposed of in a responsible manner. When
recycling your product, take it to your local collection facility or contact the place
of purchase. They will ensure that the product is disposed of in an environmentally
sound manner.
Specifications
Rated voltage
220–240 V AC, 50 Hz
Type
Cross-cut 5 × 18 mm
Capacity
10 sheets (80 gsm) at a time, 1 CD/DVD/credit card at a time
Feed entry width
Paper: 220 mm, CD/DVD: 120 mm
Shredding speed
1.6 m/min (10 sheets)
Waste bin capacity
21 l
Size (W × H × D)
35 × 44 × 22 cm (shredder mounted onto waste bin)