EXFO T200S, User Manual, Page: 88 / 146

SCPI Command Reference
82
T200S
T200S Specific Commands
ARM[:SEQuence][:LAYer]:SOURce?
Description
This query returns the source of the arm event for the sweep
sequence.
At *RST, this value is set to IMMediate.
Syntax ARM[:SEQuence][:LAYer]:SOURce?
Parameter(s)
None.
Response Syntax <source>
Response(s)
source:
Selected arm event source:
³
BUS
: the sweep sequence is started by the *TRG command
(see
*TRG
on page 78). Once initiated with the
INITiate[:IMMediate][:ALL]
on page 89, the instrument waits
for the *TRG command to start the sequence.
³
IMMediate
: no waiting for an event to occur. The sequence
starts as soon as the initiate command is received (see
INITiate[:IMMediate][:ALL]
on page 89).
Example(s) ARM:SOUR IMM
ARM:SOUR? returns IMMediate
See Also
ARM[:SEQuence][:LAYer]:SOURce
on page 81
INITiate[:IMMediate][:ALL] on page 89
TRIGger[:SEQuence]:SOURce? on page 134