EXFO T200S, User Manual, Page: 27 / 146

Setting Up Your T200S
Tunable Laser Source
21
Connecting the T200S to your Company Network
Connecting the T200S to your Company Network
The Ethernet port enables you to connect your T200S to your company network.
It enables you to install the last operating system security updates (see Updating the
Operating System Version on page 57) and to perform remote control operations on the
T200S (see Remotely Controlling the T200S on page 43).
To connect the T200S to your company network:
1.
Connect an RJ45 cable from your company network to the T200S Ethernet port.
2. In the T200S task bar, touch the button to display the Settings window and select
the Ethernet tab.
The TCP socket area enables you to configure the Ethernet connection of the T200S.
³
: indicates that the connection is established and displays the connection
speed.
³
: indicates that the connection to the network is not established, or that the
T200S is directly connected to a computer (see Setting the T200S Ethernet Port on
page 43).
³
: indicates that the port is not connected to any external device.
I
MPORTANT
Make sure that the firewall of your computer allows communication on the 5025
port.