PON Power Meter
29
4
Test Configuration
Your PPM-350D PON Power Meter has been configured by EXFO with
predefined information:
Examples of test configurations that you use in FTTx mode.
A test configuration consists of PON layer selections with their class
and speeds. Custom thresholds values can also be set for each PON
layer, depending on your unit. For each wavelength, you can select the
pass and fail criteria.
Test configuration parameters are as follows:
Location (ONT, OLT)
Measurement type (dB/dBm)
Direction (US/DS)
You may customize these parameters using FastReporter 3. Refer to the
FastReporter 3 user guide for more information.
Configuration Selection
Test configurations are displayed 5 to a page.
To open, view, and select a configuration:
1.
In the menu panel, tap on an existing test
configuration to see the
Configuration list
.
2.
If there is more than 1 page, swipe left to view
the other pages.
3.
Tap on a test configuration and tap OK to
confirm your selection.
4.
To cancel and return to the menu panel,
tap
.
