EXFO Power Blazer 88200NGE, User Manual

Page: 599 / 887

Test Results
Power Blazer
589
Summary (Traffic Gen & Mon)
Summary (Traffic Gen & Mon)
From the
Test
menu, tap
Results
, and the
Summary
tab.
Note:
For Dual Port topology select the port to be displayed.

Test Status
indicates the actual test status as follows. The global test
pass/fail verdict is displayed next to the Test Status when enabled (see
QoS Metrics
on page 359).

“--”: The test is not running or results are not available.

In Progress
: The test is running.

Completed : The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.

Start Time indicates the date and time the test was started. The date
and time is reset every time the test is restarted or reset.

Test Recovery , when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the
Test Recovery field. Refer to
Power Failure Recovery
on page 743.

Logger Full , when displayed, indicates that the logger is full. Refer to
Logger
on page 493.
Stream
The following statistics are available for each stream.

Current Throughput : See Streams - Throughput /
Customer Frame Throughput
on page 530.

Frame Loss Rate : See Streams - Frame Loss / Out-of-Sequence on
page 528.

Jitter : See Streams - Jitter on page 528.

Latency
: See
Streams - Latency
on page 529.