EXFO Power Blazer 88200NGE, User Manual

Page: 142 / 887

Test Setup - Test Configurator, Timer, and System
132
88000 Series
Modify Structure Button

PHY Type allows selecting the transceiver PHY type:
For 100GE (4 Lanes) CFP4/QSFP:
LR4/ER4
(default),
SR4
,
CWDM4
,
CLR4 , AOC , or Other . The PHY type when set to any except LR4/ER4 ,
allows enabling RS-FEC (see page 223); ensure both ends of the circuit
have the FEC enabled.
For 400GE (8 Lanes) QSFP-DD:
Optical
(default) and
DAC
.

Primary Port / Secondary Port , available with Through Mode test
application, allows selecting the module’s ports that are respectively
used as primary and secondary ports. The configuration of the network
configuration parameters will be available on the Primary Port only.

Port1 - QSFP28 (selected by default), Port2 - QSFP28 , Port3 - QSFP28 ,
and
Port4 - QSFP28
check boxes, available with FlexE BERT, allows
selection of the Power Blazer’s ports used for FlexE PHYs.