System Tabs
Ethernet and Fibre Channel Application
371
Default/Ethernet Test Preferences
Note:
The default test preferences are saved per slot on the IQS-600 meaning that
the configuration will not follow the module when changing the module
from one slot to another. However, a configuration on a specific slot will
remain when replacing a module by another module of the same model.
Configuration
Laser On
: Selects
Laser On
every time a test is created manually using
the wizard. The
Laser On
check box is selected by default.
Couple Start/Enable TX
: Available with IQS-8510B and IQS-8510G
only. Automatically selects the stream transmission when the test is
started. This setting applies to Frame Analyzer test only. The stream
transmission stops when the test is stopped. The
Couple Start/Enable
TX
check box is cleared by default. Refer to
Enable TX - On/Off
button
on page 204 for more information.
