IPTV Tabs
264
IQS-8500 Series and IQS-8120NGE/8130NGE
Discovery
Stream Monitoring
The
Add
function adds the streams to the stream monitoring list in the
overview page. The
IGMP Auto-Join
function configures the system to
issue join request to join a multicast group once a stream is added while
the test is running or when the test will be started.
Auto-Add
automatically adds all active streams present in the
discovered list to the stream monitoring list. This includes all the
streams already in the discovered list and the incoming streams. It
excludes the streams that are already in the monitoring list. The
Auto-Add
process is initiated when the test is started, and terminates
when the test stops. The stream addition is suspended when the
maximum number of monitored streams is reached.
Off
: Select the
Off
option to disable the
Auto-Add
stream.
On
: Select the
On
option to enable the
Auto-Add
to automatically
add all the active streams.
On with IGMP Auto-Join:
Select the
On with IGMP Auto-Join
option to enable the
Auto-Add
and to automatically issue a join
request once the stream is added. This option should not be
selected when connected to a SPAN or TAP port as no transmission
to the network can be initiated through these type of ports.
Manual Add
buttons adds individual streams to the stream monitoring
list. The
Add
and
Add with IGMP Auto-Join
buttons are disabled when
the maximum number of monitored stream is reached. The
Add
and
Add with IGMP Auto-Join
buttons are only available when
Auto-Add
is
Off
.
Add
Button: Pressing the
Add
button adds the selected streams to
the stream monitoring list.
Add with IGMP Auto-Join
button: Pressing the
Add with IGMP
Auto-Join
button adds the selected streams and issues a join
request.
