Stream Generation Tabs
Ethernet and Fibre Channel Application
217
Stream Configuration
For Ramp Traffic Shaping
Note:
Available for Stream 1 with Ramp and n-Ramp transmit modes.
Number of Steps
: Enter the number of steps. Choices are
2
to
100
.
The default setting is
10
.
Step Time
: Enter the time duration of each step. Choices are
100
to
8000
milliseconds. The default setting is
1000
milliseconds.
Unit
choices are
ms
(milliseconds) and
s
(seconds). The default
setting is
ms
(milliseconds).
Ramp Cycle Count
: Available with n-Ramp transmit mode only.
Enter the number of ramp cycle count. Choices are
1
to
225
. The
default setting is
1
.
