Summary Tabs
Ethernet and Fibre Channel Application
129
Alarm Summary
Test
Global
: Indicates the presence of any alarms/errors related to the test
such as
Port
,
WIS
,
Ethernet
,
Pattern
,
High Layer Protocol
,
Fibre
Channel
, and
Other
.
Fibre Channel
is not available with IQS-8510G.
Log Full
: Indicates that the logger exceeds it maximum capacity of
5000 events.
Port
: Indicates the presence of any alarms/errors related to the
physical port such as
LOS
,
Frequency
, and
LOC (Ethernet 10G WAN
and FC 10x)
. Also indicates port power measurement
Pwr (dBm)
for
optical port, frequency
Freq (bps)
, and
Offset (ppm)
for all interfaces
at the exception of 10 Mbps.
WIS
: Indicates the presence of any alarms/errors related to Ethernet
10G WAN testing such as
Section/RS
(
B1
,
LOF
or
SEF
),
Line/MS
(
B2
,
REI-L
,
AIS-L
, or
RDI-L
),
High Order Path
(
B3
,
REI-P
,
AIS-P
,
RDI-P
,
LCD-P
,
LOP-P
,
PLM-P
,
UNEQ-P
,
ERDI-PSD
,
ERDI-PCD
, or
ERDI-PPD
),
and
WIS Link
.
WIS
is not available with IQS-8510B.
Ethernet
: Indicates the presence of any alarms/errors related to
Ethernet testing such as
Errors
(
FCS
,
Jabber
,
Runt
,
Oversize
when
enabled (refer to
Oversize Monitoring on page 165
Undersize
,
Idle
,
Symbol
,
Collisions
,
Alignment
,
False Carrier, Block Error
,
Out-of-sequence
, or
Frame Loss
),
Link
, and
Fault
..
Idle
,
Symbol
,
Collisions
,
Alignment
, and
False Carrier
are not available with
IQS-8510G.
Block Error
and
Fault
are not available with IQS-8510B.
Fibre Channel
: Indicates the presence of any alarms/errors related to
the Fibre Channel testing such as
Errors
(
FCS
,
Oversize
,
Undersize
,
Symbol
for 1x/2x/4x, or
Block
for 10x),
Link
, and
Fault
for 10x. Not
available with IQS-8510G.
