Maintenance
18
Cleaning Connectors Equipped with EUI/EUA
Adapters
Regular cleaning of connectors equipped with EUI/EUA adapters will help maintain
optimum performance. There is no need to disassemble the unit.
To clean connectors:
1.
Remove the EUI/EUA adapter from the module to expose the optical connector
baseplate and ferrule.
2.
Use a lint-free wiping cloth and deposit
only one drop
of isopropyl alcohol on it.
3.
Gently wipe the connector and ferrule.
I
MPORTANT
If any damage occurs to internal connectors, the module
casing will have to be opened and a new calibration will be
required.
I
MPORTANT
Alcohol may leave traces if used abundantly. Avoid contact
between the tip of the bottle and the wiping cloth, and do not
use bottles that distribute too much alcohol at a time.
I
MPORTANT
Isopropyl alcohol takes approximately ten seconds to
evaporate. Since isopropyl alcohol is not absolutely pure,
evaporation will leave microscopic residue. Make sure you dry
the surfaces before evaporation occurs.
Push
Turn
Pull
1
2
3
Maintenance
18
Cleaning Connectors Equipped with EUI/EUA
Adapters
Regular cleaning of connectors equipped with EUI/EUA adapters will help maintain
optimum performance. There is no need to disassemble the unit.
To clean connectors:
1.
Remove the EUI/EUA adapter from the module to expose the optical connector
baseplate and ferrule.
2.
Use a lint-free wiping cloth and deposit
only one drop
of isopropyl alcohol on it.
3.
Gently wipe the connector and ferrule.
I
MPORTANT
If any damage occurs to internal connectors, the module
casing will have to be opened and a new calibration will be
required.
I
MPORTANT
Alcohol may leave traces if used abundantly. Avoid contact
between the tip of the bottle and the wiping cloth, and do not
use bottles that distribute too much alcohol at a time.
I
MPORTANT
Isopropyl alcohol takes approximately ten seconds to
evaporate. Since isopropyl alcohol is not absolutely pure,
evaporation will leave microscopic residue. Make sure you dry
the surfaces before evaporation occurs.
Push
Turn
Pull
1
2
3
Maintenance
18
Cleaning Connectors Equipped with EUI/EUA
Adapters
Regular cleaning of connectors equipped with EUI/EUA adapters will help maintain
optimum performance. There is no need to disassemble the unit.
To clean connectors:
1.
Remove the EUI/EUA adapter from the module to expose the optical connector
baseplate and ferrule.
2.
Use a lint-free wiping cloth and deposit
only one drop
of isopropyl alcohol on it.
3.
Gently wipe the connector and ferrule.
I
MPORTANT
If any damage occurs to internal connectors, the module
casing will have to be opened and a new calibration will be
required.
I
MPORTANT
Alcohol may leave traces if used abundantly. Avoid contact
between the tip of the bottle and the wiping cloth, and do not
use bottles that distribute too much alcohol at a time.
I
MPORTANT
Isopropyl alcohol takes approximately ten seconds to
evaporate. Since isopropyl alcohol is not absolutely pure,
evaporation will leave microscopic residue. Make sure you dry
the surfaces before evaporation occurs.
Push
Turn
Pull
1
2
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Summary of Contents for FVA-60B
Page 11: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Page 17: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Page 35: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...