32
5 Using a Light Source (FLS-600)
or VFL
The FLS-600 may contain up to three sources (one-port models) or up to
four sources (two-port models).
Note:
The VFL option may also be present on the FPM-600 .
Defining a List of Favorite Wavelengths
You may put the wavelengths you want to use on a list of favorite
wavelengths (the FAV list). Only wavelengths on this list are available for
measurements.
At the factory (or after recalibration), the list contains all source
wavelengths.
Note:
The list must always contain at least one wavelength. When you empty the
list, the first source wavelength is automatically added.
To add wavelengths to the FAV list (or to remove them):
1.
From normal operating mode, press
repeatedly until you reach
SRC
.
to access the first submenu, then
repeatedly until you reach the
FAV
2. Pres s
p r e s s
menu.
3. Press
to switch between available wavelengths. An asterisk (
*
)
appears beside wavelengths already on the list.
4. Press
5. Press
to include/exclude the displayed wavelength.
twice to exit setup menus.