EXFO FLS-2300B, User Manual

Page: 69 / 99

Troubleshooting
60
FLS-2300B
FLS-2300B Error Messages
-34 Command overflow:
Too many commands were sent
to the unit at a time.
Wait until the unit is done before
sending more commands.
-40 FIFO not ready for reading:
The unit’s FIFO is not ready for
reading. Commands sent will be
ignored.
If problem persists, call EXFO for
assistance.
-60 Laser over-current:
A problem occured with the
current going to the laser.
Call EXFO for assistance.
-64 EEPROM error:
The EEPROM was not detected. Call EXFO for assistance.
-65 EEPROM checksum error:
A Checksum error was detected
by the unit.
Call EXFO for assistance.
-68 Temperature error:
The operating temperature of
the unit is from 0 °C to 40 °C
(32 °F to 104 °F).
Make sure the ambient
temperature is comprised in the
specified temperature range.
-69 FPGA problem:
A FPGA problem was detected. Call EXFO for assistance.
-73 Supply voltage error:
Internal voltage values are out of
the operation range.
Call EXFO for assistance.
-74 Laser pump failure:
A problem occured in the output
(optical) power of the laser
pump.
Call EXFO for assistance.
Warning/Error
Number
Description Recommended Action
Troubleshooting
60
FLS-2300B
FLS-2300B Error Messages
-34 Command overflow:
Too many commands were sent
to the unit at a time.
Wait until the unit is done before
sending more commands.
-40 FIFO not ready for reading:
The unit’s FIFO is not ready for
reading. Commands sent will be
ignored.
If problem persists, call EXFO for
assistance.
-60 Laser over-current:
A problem occured with the
current going to the laser.
Call EXFO for assistance.
-64 EEPROM error:
The EEPROM was not detected. Call EXFO for assistance.
-65 EEPROM checksum error:
A Checksum error was detected
by the unit.
Call EXFO for assistance.
-68 Temperature error:
The operating temperature of
the unit is from 0 °C to 40 °C
(32 °F to 104 °F).
Make sure the ambient
temperature is comprised in the
specified temperature range.
-69 FPGA problem:
A FPGA problem was detected. Call EXFO for assistance.
-73 Supply voltage error:
Internal voltage values are out of
the operation range.
Call EXFO for assistance.
-74 Laser pump failure:
A problem occured in the output
(optical) power of the laser
pump.
Call EXFO for assistance.
Warning/Error
Number
Description Recommended Action
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com