Copper, VDSL2, ADSL2+, and IP Triple-Play Test Set
181
13 IPTV Analysis
The IPTV Analysis test functionality provides all the required information
for the installation, maintenance, and/or troubleshooting of video services,
including IPTV, delivered over DSL.
To view the available tabs:
Press the left/right function arrows on each side of the F1, F2, and F3 keys.
Reading Results
Test Summary
The
Test Summary
tab allows you to view the
PASS/FAIL
status and
Details
of all the tests configured for the DSL and Ethernet layers over
which the IPTV service is being delivered. If a measured value is out of the
threshold range configured for the IPTV analysis setup, the
Test Summary
screen displays a
FAIL
message.
The available test results are the
following:
³
Line Status
displays either
Connected
or
Disconnected
for
the particular line connection
under test.
³
WAN Status
displays whether the
unit is
Connected
to the wide area
network, or in idle mode.
³
IP PacketLoss
is the total number of lost video packets within the
threshold range.
³
IP PacketJitter
is the variance of the real-time transport protocol (RTP)
data packet inter-arrival time.
