background image

 

3

2. WARNINGS 

 
WARNING:  

SERIOUS INJURY OR DEATH CAN OCCUR IF CAUTION IS NOT USED. To 

reduce the risk of serious injury, read all important precautions and instructions in this manual 
and all warnings on your product before using it.  Before beginning any exercise program, consult 
your physician.  This is especially important for persons over age 35 or persons with pre-existing 
health problems. 
 

1.  Read all instructions in this manual and all warnings on the product before using it. Use this product 

only as described in this manual and keep this manual handy for future reference. 

2.  Keep children and pets away from this product at all times.  Keep hands and feet away from moving 

parts. 

3.  It is the responsibility of the owner to ensure that all users of this product are adequately informed of all 

precautions. 

4.  This product is intended for consumers use only and in an indoors environment.  Do not use it in a 

commercial, rental, or institutional setting. 

5.  Place the product on a level surface, with at least 3 feet of clearance around it.  To protect the floor or 

carpet from damage, place a mat under it. 

6.  Inspect and properly tighten all parts regularly. Replace any worn parts immediately. Make sure all 

locking mechanisms are properly secured before using the unit. 

7.  Wear appropriate clothes while exercising; do not wear loose clothes that could become caught.  

Always wear athletic shoes for foot protection. 

8.  Keep this product indoors, away from moisture and dust. Do not put it in a garage or covered patio, or 

near water. 

9.  Over exercising may result in serious injury or death.  If you feel faint, dizzy, or experience pain while 

exercising, stop immediately and cool down. 

10. Never exercise alone, always have someone present to ensure your safety when using this fitness 

product. 

11. Add or take off equal amounts of weight on each side of the barbell to prevent it from tipping over. 
12. Do not store your barbell with weight on the bench for an extended period of time to prevent the bar 

from bending. 

13. Use caution when adding or removing weight from the leg developer to prevent the unit from tipping 

over. 

14. Do not use a barbell that is longer than five feet with this weight bench. 
15.  Always make sure there is an equal amount of weight on each side of your barbell when using it. 
16.  When you are using the leg developer, place a barbell wit the same amount of weight on the weight 

rests to balance the bench. 

17.  When using the backrest in an inclined or level position, make sure that the support rod is placed 

securely between the uprights. 

 

MAXIMUM WEIGHT CAPACITIES 

These are the maximum weight capacities recommended by the manufacturer.  Use Caution when 
exercising and always workout with safety in mind. Serious injury or death can occur if these warnings are 
not followed. Never exercise alone. 
 
Maximum User Weight = 200 lbs 
Maximum Leg Developer Capacity = 50 lbs 
Maximum Uprights or Squat Rack Capacity = 150 lbs 
Maximum Butterfly Arms Capacity = 30 lbs 
Maximum Weight Capacity (INCLUDING USER) = 350 lbs 
 
 
 
 

Summary of Contents for SLEXFE0230












Reviews: