1. Front/Rear Stabilizers and Right/Left Foot Pedals Installation
Position the Front Stabilizer (2) in front of the Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (2) onto the front curve of the Main Frame (1) with two M8x72
Bolts (20), two Ø8 Curve Washers (21), and two M8 Cap Nuts (22). Tighten cap nuts
with the #13, #15 Double Open End Wrench provided.
Position the Rear Stabilizer (3) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (3) onto the rear curve of the Main Frame (1) with two M8x72
Bolts (20), two Ø8 Curve Washers (21), and two M8 Cap Nuts (22). Tighten cap nuts
with the #13, #15 Double Open End Wrench provided.
Foot Pedals Installation
The Cranks, Pedal Shafts, and Foot Pedals are marked “R” for Right and “L” for
Left.
Insert the pedal shaft of Left Foot Pedal (15) into threaded hole in the Left Crank (17).
Turn the pedal shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip
the threads.
Tighten the pedal shaft of Left Foot Pedal (15) with the #13, #15 Double Open End
Wrench provided.
Insert pedal shaft of Right Foot Pedal (14) into threaded hole in Right Crank (16). Turn
ASSEMBLY
9
Important:
Please make sure the right foot
pedal matches up with the right
crank and the left foot pedal
matches up with the left crank.
If reversed the cranks may
become damaged or stripped.
Important:
Screw Right Foot Pedal
(14) into right crank
clockwise!
Screw Left Foot Pedal (15)
into Left crank
counter-clockwise!
Double Open End Wrench #13, #15
Tool:
