21
ADJUSTMENTS
Belt Adjustment:
The belt may come loose during transportation and/or from use. After prolonged use of the treadmill,
the belt will stretch out. If the belt is shifting to the left, turn on the main power switch of treadmill
and let the belt run at the speed of 1-1.5 MPH. Using the Allen Wrench provided, turn the left rear
roller adjustment bolt 1/4 turn in the clockwise direction. You should see the belt start to correct
itself by moving back toward the center. Repeat the above procedure until the belt is properly
centered.
If the belt is shifting to the right, turn on the main power switch of treadmill and let the belt run at the
speed of 1-1.5 MPH. Using the Allen Wrench provided, turn the right rear roller adjustment bolt 1/4
turn in the clockwise direction. You should see the belt start to correct itself by moving back toward
the center. Repeat the above procedure until the belt is properly centered.
If the belt is slipping during use, turn off and unplug the treadmill. Using the Allen Wrench provided,
turn both left and right rear roller adjustment bolts 1/4 turn in the clockwise direction for the same
amount, then turn on the main power switch of treadmill and let the belt run at the speed of 1-1.5
MPH. You should now walk on to the belt to determine if the belt is still slipping. Repeat the above
procedure until the belt no longer slips.
