Exergen DX SERIES User Manual Download Page 15

Display Resolution

0.1 °F or 0.1 °C

Display Update

10 times/second

Measurement Response Time

Approximately 0.1 seconds

Field of View

1:1  0.63" (15.9 mm) Diameter Spot Area in AECS Mode

Spectral Sensitivity

2 to 20 microns

Battery 

One 9 volt

Battery Life

5000 readings (10 seconds each)

Instrument Ambient Temperature

Operating Range: 32 to 122°F (0 to 50°C)
Storage Range:  -22 to 140°F (-30 to 60°C)*

*Extended storage at temperature extremes will reduce battery life.

Chapter Seven - Warranty

Exergen warrants the DX to be free of defects in material and workman-
ship for a period of one year from the date of purchase, and will repair or
replace the returned instrument at no charge during the period.  No
other warranties are implied.

If repair is required:

Contact the factory for a Return Material Authorization (RMA)
Number.  Mark the RMA number on both the shipping box and the
packing slip.  Include a description of the unit's problem.  Ship the
instrument prepaid.  Exergen will return ship prepaid.  After you have
received an RMA Number, send to:

EXERGEN CORPORATION
Repair Department
RMA ________________

400 Pleasant 

Street

Watertown, MA 02472

12

Summary of Contents for DX SERIES

















Reviews: