Alarm Information
Over/Low Voltage Alarm
When power voltage is detected to be over or below the normal range (10.8V-15.6V) of
repeater, the Alarm Indicator will glow red and the LCD display will give you the prompt
message below:
Low Voltage Alarm Over Voltage Alarm
Then the repeater will automatically stop working and the prompt message will remain on
the LCD display.
You need to:
1. Check whether the power voltage is too low or too high. If yes, replace the DC power
supply or external battery.
2. Check if the power cord gets loose or damaged. If yes, secure or replace the cord.
3. If you fail to solve the problem, contact your local dealer for technical support.
Caution:
If low voltage is detected when the repeater is powered by an external
battery, please charge it in time. Disconnect the battery from the repeater before
charging.
