background image

New Contact

You can add a new contact to the Private, Group, or Phone 
Call Contact list.

   

The ID of each private call contact must be unique.
The alias of each private call contact can contain 16 

   

      characters at most and the ID is made up of 8 digits. Set 

 

      the ID according to the dial rules.

 

Note:

 You can press the       key on the keypad to switch 

the input method when editing the alias.

 

  

Contact

To access this item, press the 

Menu

 key in the home screen 

and then select “Contact”.

Private Call Contact

You can save up to 256 entries of private call contact 
information in the list. To access this item, select “Contact -> 

Private Call Contact” or press the shortcut key programmed 
via the CPS for Contact and then select "Private Call Contact”.

Group Call Contact

You can save up to 256 entries of group call contact 
information in the list. To access this list, select “Contact -> 
Group Call Contact”.
For each group call contact, you can choose to perform any 
of these operations: View, Edit, and Delete.

   

For each private call contact, you can choose to perform 

     

 

any of these operations: View, Edit, and Delete.

   

To delete all private call contacts in the list, select 

     

 

"Contact -> Private Call Contact -> Selected Contact -> 

     

 

Delete All". 

25

DMR Trunking Functions and Operations

Summary of Contents for EP8100 U5





















































Reviews: