X3M
User Manual
www.excelvalley.com
12
SoundBank upload process
Plug the X3M in a USB port and the USB MIDI driver X3M will become
available.
Start X3MUPLOAD and in the “Select interface” section
select the right
MIDI device
: X3M for OUT and IN. Look under “Target Device” and
confirm the model and firmware version.
In the “Action” section, click on the button with the three dots and
select a SoundBank
in the DXB-format. The Destination address should
update automatically to 0x80000 (this is the default address for the
SoundBank).
Press the “Update” button
and the flashing procedure commences.
Uploading the GMBK5128.DXB takes approximately 120 seconds.
After the SoundBank is uploaded,
press “Reboot” button
. You might hear
a confirmation sound from the operating system.
The X3M is now ready for use!