•
•
•
Installing the Incubator
Place the incubator onto a level, horizontal surface for
use and long term storage.
Insert the column connector of the adaptor to the
back of the incubator and the adaptor to the cord/
plug. Insert the cord/plug into a power supply.
Turn on the main switch located on the back of the
incubator. The incubator is ready to operate when the
display becomes visible.
See “Setting the Temperature and Incubation Time” to
adjust these parameters prior to use.
Once the incubator has reached the appropriate
temperature for the SCBI configuration that will be
incubated, place the SCBIs individually into the wells
within the aluminium block. Once the SCBIs are in the
wells, place the transparent lid over the SCBIs.
4
