3
-
When the power cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
-
Do not use your appliance with an extension cord unless it has been
checked and tested by a qualified electrician or electrical supplier.
3-ASSEMBLY OF YOUR PEDESTAL FAN
Loosen the height adjustment ring and extend the support pole. Initially the support
pole will be held tightly in place. If necessary, use a pair of pliers to grasp the support
pole and pull it into position.
To assemble the safety grille and blade assembly, remove the spinner (by turning it
clockwise), then the locking nut (by turning it anticlockwise) from the motor spindle.
Place the back safety grille into position. Ensure the safety grille fits onto the
locating lugs (Fig.1). If this is done correctly, the safety grille
’s carry handle will be at
the top.
Fix the safety grille into position by replacing the locking nut tightly by hand (Fig.1)
Do not force the locking nut. (Fig.1
– Locating lugs and locking nut)
