--------------------------------------------------------------------------
P12
3.4 Setting Operating mode
NOTE: All the C.O. lines are in operator mode is the default setting, the operator ringing
Extension is 601 and 602.
3.4.1 Setting Auto-attendant Mode (OGM) for C.O. Lines
Format: 1 0 #:
Description: allows all the C.O. lines in Auto-attendant Mode (DISA --Direct Inward System
Access status). In this mode, Caller will hear the OGM recorded message, while
all extensions are in MUTE mode
Format: 1 0 M #
Explanation: M: C.O. line No.1-No.4
Description: allows the No.M C.O. lines in Auto-attendant Mode( DISA --Direct Inward System
Access status).
Example: Set C.O. line 2 and 4 in Auto-Attendant mode, other C.O. line in operator mode.
1. If the caller doesn’t know the extension number, he can inquiry the operator by dialing
“0”.
2. Outgoing Message must be record when setting this mode.
3.4.2 OGM busy Process in Auto-attendant Mode
Format: 1 5 4 0#
Description: when external call in and the OGM is busy, then system is waiting, this is default
setting.
Format: 1 5 4 1#
Description: When multiple external lines calling in, because auto-attendant just one or two
lines, some one external line calling just can be waiting, the system can be set to ring the operator
mode ringing extension(refer3.8.2&3.8.3) and will not lose any calling.
3.4.3 Setting Operator Mode for C.O. line
Format: 11# allows all the C.O. lines in Operator mode,
this is default setting.
Summary of Contents for CDX-CS
Page 1: ......
