Excell GTW, User Manual

Page: 12 / 35

EXCELL PRECISION CO., LTD.
02018058 ZSME300000264 10
2. Recall Check-weighing Values
Press key then press key
⇒
Recall “Low limit value”
Then press key again
⇒
Recall “High limit value”
Then press key again
⇒
Recall “Beeper value”
Then press key again
⇒
Back to the beginning
3. Clearing Check-weighing Values
Press key then press key, and then press key
⇒
Recall “Low limit
value”. Then press key again
⇒
Clear “High limit value” and “Beeper value”
Press key then press key 6 times continuously
⇒
Clear all values.
2-2-3 Totalizing
1. Weight Totalizing
Place goods on the platter, after stable and press key to save the weight value.
Then the display shows the total number of additions and the totalized weight value.
And the (M+) indication “
” will flash on the display. The indicator will recover to show
the weight value of the goods on the platter after 3 seconds and the (M+) indication “ ”
is on.
The indicator allows the next totalizing operation, even when the weight value does not
return back to zero. The
key is functional, when the weight value changes by more
than 10d. The indicator will save the totalized weight value after the weight is stable.
The indicator can totalize positive or negative weight but can’t do both at the same time.
The totalized weight store must be reset to zero before it is possible to select positive or
negative totalizing mode.
The totalizing function can be used up to a maximum of 9999 times before it must be
reset. The totalizing display is limited to 6 digits maximum.
When totalizing, RS-232 will also output. ( Refer to F5 setting)
2. Clear Totalized Weight Values
♦
Press then key to clear all totalized weight values.
♦
When changing between weighing and counting mode, or selecting weighing unit, the
indicator will automatically clear all the totalized weight values.
♦
The indicators will automatically clear all the totalized weight values after turning on.
3. Recall Totalized Weight Values
Press key to display the total number of additions and the totalized weight value.
And the (M+) indication “ ” will flash on the display. The indicator will return to the
weighing mode after 3 seconds.