Excell 14key User Manual Download Page 4

 

 

 

                                                                                                                     

                   

 

2

EXCELL PRECISION CO., LTD.

 

01008044

ZSME100000117 

 

 

 

 

 

Instruction for Use 

1. In order to prevent the scale from dust and static electricity, please fix the dustproof 

cover on the scale with double-sided adhesive. 

2. The scale should not be drenched by rain or water. (If it gets wet carelessly, please wipe 

it dry with a cloth. If its operation is abnormal, please send it to our distributor for 

service. ) 

3. Please keep the scale in a cool and dry place. Do not store at high temperatures or 

damp places. 

4. Please keep the scale clean and free from insect infestation. 

5. To avoid impact and it is to be used under designated pressure (the weight put on the 

platter can not exceed the maximum capacity of the scale). 

6. If the scale is not going to be used for some time, please clean it and store it in a plastic 

bag in dry condition. A desiccant sachet may be included to prevent moisture build up. 

The scale should be recharged every 3 months to prevent failure of the internal 

rechargeable battery. 

7. The commodity should be placed in the center of platter for accurate weighing. The 

dimension of the weighted commodity should not exceed the dimension of platter. 

8. Please release the protection screw “

4

” before weighing. 

9. Please operate or charge the scale in an open area. Do not squeeze the power cord to 

avoid wire on fire. 

10.  Operating temperature: -10

 ~ + 40

 

11.  Any suggestion for product is welcomed 

Preparation Before Using 

1.  Put the scale on a firm level surface free for accurate weight readings. Adjust the four 

leveling feet to get the leveling bubble at the centre of circle. 

2. Scale must be used under a stable temperature and stable air flow. Avoid direct 

sunlight onto the scale or near the exhaust port of ventilating system.   

3. Scale must be used under individual socket to avoid the interference of other electric 

appliances. 

4.  Remove any weight that might be on the platter before the scale is switched on.   

5. Please note that when      or        symbol appears on the screen, the scale needs

 

to 

be charged. 

6.   Introduction of Storage Battery 

Thank you for purchasing Price Computing Scale. In order to 

operate smoothly, to last the durability, and to reduce the chance 

of breakdown for this product, please read this Manual carefully. 

Summary of Contents for 14key



















Reviews: