X-Cite
®
XLED1: Quick Start Guide
SIDE 2
Warning
– Refer to Safety Precautions Booklet 035-00636R for all safety precautions prior to use.
User Guide 035-00465R download:
http://www.excelitas.com/Pages/Product/X-Cite-XLED1.aspx
Excelitas Canada Inc.
2260 Argentia Road Mississauga ON L5N 6H7
Tel: 1-905-821-2600
Toll Free: 1-800-668-8752
www.excelitas.com/x-cite
Operation
1.
Ensure the master power button is OFF. Ensure that the Light Guide has been
properly installed.
2.
Plug in
XLED1
power adaptor into a properly grounded electrical outlet.
3.
Push the master power button to ‘ON’ and ensure that the internal fans are
operational. The cooling fans will remain functional throughout the complete
start-up to power-down cycle.
4.
The LED ‘ON’ indicator light will be off (no illumination).
5.
The system will commence with a Power-On-Self-Test (POST). All outputs will
be inactive and all inputs will be unresponsive during the POST cycle. In the
event of a POST error, the system will report the error and either allow the
user to proceed or halt, depending on the error condition.
6.
If using the GUI Control Panel, once the system runs through and has exited
the POST sequence the system is ready to use, there is no reset or warm up
sequence required.
If Using the Optional Touch Screen Controller:
7.
The screen will turn on automatically.
8.
Enter the system at the log-in Screen. User ID numbers must be 4 digits. The
system ships with qty. 5 default ID log-in numbers:
1234 / 2234 / 3234 / 4234 / 5234.
9.
If logged in as a ‘Guest’ data will not be saved after completion of session.
10.
Before powering down the system navigate to the Main LED Screen and press
the LOGOUT pad. This will ensure all data entered from the latest session is
saved. Failure to logout before powering down the system will result in loss of
all recent setting changes.
11.
Power down the system after use, ensure LED button is OFF, push the master
power button to the ‘OFF’ position.
RISK GROUP 2
CAUTION
Possibly hazardous optical radiation/UV emitted from this product.
Use appropriate shielding. IEC 62471-2:2009
Caution eye damage may result from directly viewing ultraviolet
light – Protective eye shielding and clothing must be used at all
times.
Detailed Instructions for the GUI Control Panel or the Optional Touch
Screen Controller, refer to X-Cite
®
XLED1 User Guide 035-00465R
Screens Sitemap:
Edit LED Name
Main LED Screen
Set LED Triggers
Trigger Graphs
System Maintenance
Alarm Information
System Information
REGULATORY
(refer to user guide for complete details)
Product Safety and Electromagnetic Compatibility
The X-Cite XLED1 has been tested and found to comply with product safety and
electromagnetic compatibility requirements. For a complete list of tests and for
certification details, please contact your X-Cite representative or visit
http://www.excelitas.com/Pages/Product/X-Cite-XLED1.aspx
CE Marking
Council Directive 2014/35/EU
Low Voltage Directive
Council Directive 2014/30/EU
EMC Directive
Council Directive 2012/19/EU
WEEE Directive
Council Directive 2011/65/EU
RoHS
WEEE Directive
China RoHS RoHS
FCC
Note:
Ensure that users
log-out
of the
Touch Screen Controller
before powering down or all entered data from the latest
session will not be saved. The system is defaulted
NOT
to
save any data when logged in as ‘Guest’ regardless of logging
out or not.
