Page | 8
2.
Point the remote control directly to the receiver, press the
“ON”
button on remote, the device will sound 1 beep and the
unit will start to heat in high power mode (100% of the rated
power) and all three heat lamp indicators will turn red. Refer
to the (picture 2)
PICTURE 2.
3.
To return the heater to STANDBY MODE, p
ress the “Standby”
button on
remote, the device will sound 1 beep and one of the heat lamp indicator lights
will flash
. This indicates the heater is in standby mode and the unit won’t
radiate any heat.
4.
To change the heater from STANDY MODE to LOW HEAT,
point the remote directly to the heater and press the LOW
button on the remote. The device will sound 1 beep, one of
the heat lamp indicators will turn red and the heater will start
to heat in low power mode ( 33% of the rated power) refer to
PICTURE 3.
Picture 3.
5.
To change the heater from STANDY MODE to MEDIUM
HEAT, point the remote directly to the heater and press the
MED button on the remote. The device will sound 1 beep, two
of the heat lamp indicators will turn red and the heater will
start to heat in medium power mode ( 66% of the rated
power) refer to ( Picture 4)
PICTURE 4.
6.
To change the heater from STANDY MODE to HIGH HEAT,
point the remote directly to the heater and press the HIGH
button on the remote. The device will sound 1 beep, three of
the heat lamp indicators will turn red and the heater will start
to heat in high power mode ( 100% of the rated power) refer
to ( Picture 5)
PICTURE 5.
