background image

 

 

- 20 - 

Technical manual G-Lite 

© 2009 VAN OS MEDICAL 
International customers please contact: 
Tel. +31(0)167 573020, Fax +31(0)167 573381, E-mail: 

sales@vanosmedical.

nl, 

www.vanosmedical.com

 

Irish and UK customers please contact: 
Tel. +44(0)1757 701177, Fax +44(0)1757 706011, E-mail: 

[email protected]

www.vanosmedical.com

  

  

 

9. WARRANTY 

9.1 Warranty application 

 

Together with your wheelchair you get the factory warranty. However, it is possible that your dealer offers a 
supplementary warranty. This manual only handles the factory warranty as given by Van Os Medical. 
 
This warranty is only granted to you as the consumer. It is not intended to be used commercially (like hiring or 
institutional use). The warranty is limited to defects to materials and possible hidden shortages. VAN OS MEDICAL 
guarantees the following components on your EXCEL® wheelchair: 

 

COMPONENT 

N

o

n

e

 

2

 y

e

a

rs

 

1

0

 y

e

a

rs

 

A) Side frames, cross bar 

 

 

 

B) Wheels, wheel brakes, front forks, arm rests, foot rests and all 

components not stated here under: 

 

 

 

C) Upholstered components like seat and back upholstery and rigid arms, 

plastic parts as foot plates, coating and rubber parts. Tyres and inner tubes. 

 

 

 

 

Also you can find the warranty periods label on the frame of your wheelchair. See also chapter 1. 

 

 

9.2 Warranty definition 

 

Your manual is also the warranty form, fill in the relevant details in and store it carefully. 

 

 

Warranty conditions

 

The warranty period commences upon the date of purchase. If within the warranty period, your wheelchair will be 
defect, it will be repaired or replaced.  
However you do need to provide to Van Os Medical a complete filled in warranty registration form or a copy of the 
bill with date of purchase. Without a warranty registration form or a proof of the purchase date the warranty will 
start at the date when VAN OS MEDICAL sent the invoice to the dealer. 
 
Repairs and replacement must be performed by an authorised Van Os Medical service agent. To qualify for the 
warranty, your wheelchair must require the care standards. Furthermore, if a problem occurs, you need to fully 
inform the Van Os Medical service agent immediately. If you use the wheelchair outside the designated area of the 
Van Os Medical service agent, you can repair your wheelchair by any other, by the factory approved, service agent. 

 

When parts of the wheelchair, within 24 months after the commence date, needs reparation or replacement, as a 
result of a manufactory or material error and the wheelchair is with its first owner, the part or parts will be 
repaired or replaced free of charge. 
 
 
This warranty does not include any labour charges incurred by replacements.  
 

 

This warranty is 

not transferable.

 

Summary of Contents for G-Lite


























Reviews: