user Programmable Features (cont’d)
Feature #15 - Alarm Duration
30 Seconds
(press “
start
” 1 time to program)
- DEFAuLT
60 Seconds
(press “
start
” 2 times to program)
90 Seconds
(press “
start
” 3 times to program)
120 Seconds
(press “
start
” 4 times to program)
This feature selects the period of time for which the system sounds the siren (and/or
horn) and flashes the lights when triggered.
caution: Before lengthening the Alarm
Duration you should always check and determine if there are any local anti-
noise or nuisance ordinances in your area.
Feature #16 - Arming Delay
3 Seconds
(press “
start
” 1 time to program)
- DEFAuLT
15 Seconds
(press “
start
” 2 times to program)
30 Seconds
(press “
start
” 3 times to program)
45 Seconds
(press “
start
” 4 times to program)
This selects how long the alarm waits to monitor trigger zones after arming.
Feature #17 - Open Door warning upon Arming
On
(press “
start
” 1 time to program)
Off
(press “
start
” 2 times to program)
- DEFAuLT
When this feature is turned on, if one of the vehicle’s doors is open at the time that
the system is armed via the controller or transmitter, the siren will chirp 3 times and
the parking lights will flash 3 times instead of once.
Feature #14 - ignition Activated Override
On
(press “
start
” 1 time to program)
Off
(press “
start
” 2 times to program)
- DEFAuLT
This feature allows an activated system to be overridden and disarmed by simply
turning the ignition switch on within 10 seconds of the system’s activation. After 10
seconds, the Emergency Override must be performed.
Feature #13 - Securecode
nOT AVAiLABLE On ThiS mODEL
10
