5
The Status Light helps to visually confirms the status of the system and provides
a high level of visual deterrence. The Status Light is located in the window mount
receiver unit.
Normal System Status
1) Off = The remote starter system is off, in standby mode.
2) On Constant = The system is in the Valet Mode, with the remote starter system
disabled.
Starting System Status
The Status Light also indicates the remote start status:
3) Flashing Slow (once per second): Remote start is on.
4) Flashing Fast (after activating remote start): The system is in the process of start-
ing the engine.
Remote Starting Diagnostics
whenever the system is placed into Valet Mode, the Status Light illuminates
solid. However, when this first occurs, the Status Light will flash 1 to 6 flashes be
-
fore resuming solid illumination. This indicates why the engine stopped running from
the last previous remote starting attempt.
5) 1 Flash = Programmed run time expired.
6) 2 Flashes = Brake was pressed or hood opened.
7) 3 Flashes = Engine stalled or bad tach signal.
8) 4 Flashes = Received transmitter command to stop.
9) 5 Flashes = gear selector removed from “park”.
10) 6 FLashes = Low voltage.
The Status Lights
