background image

EXCALIBUR ELECTRONICS,

INC., warrants to the original con-

sumer that its products are free from

any electrical or mechanical defects

for a period of 90 DAYS from the

date of purchase.  If any such defect

is discovered within the warranty

period, EXCALIBUR ELECTRON-

ICS, INC., will repair or replace the

unit free of charge upon receipt of

the unit, shipped postage prepaid

and insured to the factory address

shown at right.

The warranty covers normal con-

sumer use and does not cover dam-

age that occurs in shipment or failure

that results from alterations, acci-

dent, misuse, abuse, neglect, wear

and tear, inadequate maintenance,

commercial use, or unreasonable use

of the unit.  Removal of the top panel

voids all warranties.  This warranty

does not cover cost of repairs made

or attempted outside of the factory.

Any applicable implied warranties,

including warranties of mer-

chantability and fitness, are hereby

limited to 90 DAYS from the date of

purchase. Consequential or inciden-

tal damages resulting from a breach

of any applicable express or implied

warranties are hereby excluded.

Some states do not allow limitations

on the duration of implied warranties

and do not allow exclusion of inci-

dental or consequential damages, so

the above limitations and exclusions

in these instances may not apply.

The only authorized service center

in the United States is:

Excalibur Electronics, Inc. 

13755 SW 119th Ave 

Miami, Florida 33186 U.S.A.

Phone: 305.477.8080

Fax: 305.477.9516

www.ExcaliburElectronics.com

Ship the unit carefully packed,

preferably in the original carton, and

send it prepaid, and adequately

insured. Include a letter, detailing the

complaint and including your day-

time telephone number, inside the

shipping carton.  

If your warranty has expired and you

want an estimated fee for service,

write to the above address, specify-

ing the model and the problem.

PLEASE DO NOT SEND 

YOUR UNIT WITHOUT

RECEIVING AN ESTIMATE FOR

SERVICING. WE CANNOT

STORE YOUR UNIT!

Play games live at: www.ExcaliburElectronics.com

Limited 90-Day Warranty

22

23

Warning for Electric Air Pump

•  This appliance has a polarized plug (one blade is wider than the

other). To reduce the risk of electric shock, this plug is     

intended to fit into a polarized outlet only one way. If the plug

does not fit fully into the outlet, reverse the plug. If it still does

not fit, consult an appliance repair-person. Do not attempt to 

force the plug into the wall outlet.

• 

To reduce the risk of electric shock, do not use if the 

power cord appears damaged.

Never over-inflate an item. The pressure may cause the 

item to burst.

Do not leave the pump unintended while it's turned on. 

Do not use the pump in wet conditions.

Do not face the ports of the pump towards your face, 

especially your eyes.

Do not insert fingers or other objects into the ports of the

pump at any time. 

Do not place the pump on the ground when turned it. It 

could suck in rocks and other small objects. This will 

break the pump.

Do not use this fan with any solid-state speed control 

device. 

• Do 

not leave the pump on for an extended period of time.

This may burn out the motor.

Keep out of reach of children.

Summary of Contents for Motorized Pool Lounger PR10














Reviews: