9
CH“ buttons will still operate - but the optional Starter Interrupt will not operate,
and any programmed automatic functions are suspended.
To exit Valet Mode
simply press and release the Status Light/Valet
Button at any time; the Status Light will turn off.
System Override:
If the last system operation was locking the doors
by the transmitter, a System Override is required before placing the system into
Valet Mode, or starting the engine if the optional Starter Interrupt is installed.
To obtain a System Override:
Step 1
Enter the vehicle normally.
Step 2
Using your key, turn the ignition “ON” (do not start).
Step 3
Within 5 seconds, press and release the Status Light/Valet Button once.
The Status Light will stop flashing.
1
2
3