Page - 33
If 15 seconds of no programming activity expires (not pressing either transmitter
button or selecting another Feature) will cause the system to exit the Features
Programming Mode, which is indicated by two long siren chirps.
The 29 Programmable Features and their factory-set default settings are:
1)
Personal Coded Override: Default 1 & 0.
2)
Last Door Arming: Default OFF.
3)
Automatic Rearming: Default OFF.
4)
Starter Interrupt 90 Seconds After Ignition "Off" Or Disarming: Default OFF.
5)
Doors Lock Upon Last Door Arming: Default OFF.
6)
Doors Lock Upon Automatic Rearming: Default OFF.
7)
Doors Lock Upon Ignition "On": Default ON.
8)
Unlock #1 Upon Ignition "Off": Default ON.
9)
Unlock #2 Upon Ignition "Off": Default ON.
10)
Open Door Bypass For The Previous Three Features: Default ON.
11)
Confirmation Horn Honks (or Siren Chirps): Default ON.
12)
Confirmation Horn Honks (or Siren Chirps) While In Valet Mode: Default OFF.
13)
30 Or 60 Second Activated Alarm Cycle: Default 60 Seconds.
14)
Lights On 30 Or 5 Seconds Upon Disarm: Default 30 Seconds.
15)
Disarm System Upon Trunk Release: Default ON.
16)
Doorlock Pulse Time .8 Or 3 Seconds: Default .8 second.
17)
Double Pulse Unlock (DPU
TM
): Default OFF.
18)
3 Or 45 Second Arming Delay: Default 3 Seconds.
19)
Pulsed Horn / Steady Siren Output: Default Steady Siren.
20)
Loud or Soft Confirmation Horn Honks: Default Loud.
21)
Total Closure Lock Output: Default OFF.
22)
Ignition-Activated Anti-Carjacking Protection: Default OFF.
23)
Door-Activated Anti-Carjacking Protection: Default OFF.
24)
3rd Channel Activated Anti-Carjacking: Default OFF.
25)
Open Door Warning Upon Arming: Default OFF.
26)
Current Sensing: Default ON.
27)
Current Sensing Delay 3 Or 210 Seconds: Default 210 Seconds.
28)
Remote Start Engine Run Time 10 Or 20 Minutes: Default 10 Minutes.
29)
Automatic Remote Engine Start: Default OFF.
Programmable Features
1)
Personal Coded Override: Default 1 & 0. For a more secure Override Mode, the
vehicle owner may customize this security system by selecting the number of Valet
Switch presses needed to achieve the Override Mode. To change the system from the
default setting, follow Steps 1, 2, and 3 on Pages 31-32. At Step 4, press and release
the transmitter's large upper button a number of times equal to the desired Personal
Code for stage 1 of the Override Mode. The system will respond to each transmitter
button press with a siren chirp. After pressing the transmitter button the desired num-
ber of times, wait for the system to chirp the siren an equal number of times. Now
press and release the transmitter's small center button a number of times equal to the
Page - 34
desired Personal Code for stage 2 of the Override Mode. The system will again chirp
the siren in the same fashion as the Code entered for stage 1. If the system has un-
known customized Personal Override Code already entered, the factory-set default of
one press can be obtained by resetting the system: on the bottom of the system control
module is small opening with two solder contacts visible below. Use a small slotted
screwdriver to short the solder contacts together until the system responds with a
long
siren chirp.
2)
Last Door Arming: Default OFF. This operation of this Feature is explained in
detail on Pages 13-14. To change the system from the default setting, follow Steps 1,
2, and 3 on Pages 31-32. At Step 4, press and release the transmitter's large upper
button. The system will respond with a single siren chirp to indicate that the Feature
is ON. Pressing the small center button will turn this Feature OFF, with the system's
response being two siren chirps.
3)
Automatic Rearming: Default OFF. On occasion, people have accidentally disarmed
their security system by unknowingly having the transmitter's button pressed while in
a purse or pocket. To prevent such accidental disarming, if this Feature is utilized,
the system will automatically rearm itself 90 seconds after disarming, unless the igni-
tion switch is turned "on". Also, if Feature #5 (Doors Lock Upon Automatic Rearm-
ing) is utilized, the doors will also lock when the system automatically rearms. Auto-
matic Rearming is confirmed by a fast flashing LED. Once the ignition switch is
turned "on", the system will stay in the disarmed condition until you are ready to arm
Page - 35
the system again from the transmitter or from the Last Door Arming Feature. Open-
ing a door will also stop Automatic Rearming, but the countdown will resume when
the door is shut. While the door is open, the LED Status Light will be on steady until
the door is shut, upon which it will resume flashing fast, or, the ignition is turned
"on", which will extinguish the light.
To change the system from the default setting, follow Steps 1, 2, and 3 on Pages
31-32. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp to indicate that Automatic Rearming is ON.
Pressing the small center button will turn this Feature OFF, with the system's response
being two siren chirps.
4)
Starter Interrupt 90 Seconds After Ignition "Off" Or Disarming: Default OFF.
Activating this Feature will cause the Starter Interrupt output to automatically
engage 90 seconds after the ignition switch is turned "off", and also 90 seconds after
disarming the system. This automatic engagement will occur even if the security sys-
tem is in a disarmed state, but not if it is in Valet Mode. Once the Starter Interrupt
output is activated, the system must be armed, then disarmed with the transmitter, or
placed into the Easy Valet
TM
Mode by pressing and holding the Valet Switch for 2
seconds to disengage it.
To change the system from the default setting, follow Steps 1, 2, and 3 on Pages
31-32. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp to indicate that Automatic Rearming is ON.
Pressing the small center button will turn this Feature OFF, with the system's response
being two siren chirps.
Page - 36