Excalibur AL-1830-EDPB, Operation Manual

Page: 19 / 24

19
Feature #17 - ignition Activated Anti-Carjacking Protection
Off (press “ disarm/unlock ” button to program) - DEFAULT
On (press “ arm/lock ” button to program)
This form of Anti-Carjacking is initiated by the ignition key being turned on. The Anti-
Carjacking protection, and the three ways to initiate it are described on page 14
Feature #19 - Remote Activated Anti-Carjacking Protection
Off
(press “
disarm/unlock
” button to program)
- DEFAULT
On (press “ arm/lock ” button to program)
This form of Anti-Carjacking is initiated by activating the 3rd channel from the control -
ler or transmitter The Anti-Carjacking protection, including the three ways to initiate it
are described on page 14
Feature #18 - Door Activated Anti-Carjacking Protection
Off (press “ disarm/unlock ” button to program) - DEFAULT
On (press “ arm/lock ” button to program)
This form of Anti-Carjacking is initiated by a door being opened. The Anti-Carjacking
protection, including the three ways to initiate it are described on page 14
Feature #20 - Open Door Warning Upon Arming
Off (press “ disarm/unlock ” button to program) - DEFAULT
On (press “ arm/lock ” button to program)
When this feature is turned on, if one of the vehicle’s doors is open at the time that
the system is armed via the controller or transmitter, the siren will chirp 3 times and
the parking lights will flash 3 times instead of once.
User Programmable Features (cont’d)
Feature #21 - Remote Start Activation
Press “ start ” button 2 times (press “ arm/lock ” button to program) - DEFAULT
Press “ start ” button 1 time (press “ disarm/unlock ” button to program)
Press Lock & Unlock (press “ ii ” button to program)
This feature changes how the remote start feature is activated using the controller or
transmitter
Feature #22 - Remote Start Run Time
10 minutes (press “ disarm/unlock ” button to program) - DEFAULT
5 minutes (press “ arm/lock ” button to program)
15 minutes (press “ trunk ” button to program)
20 minutes (press “ start ” to program)
This feature sets the period of time that the engine will run when remote started. If the
engine is not stopped by controller/transmitter command or a safety circuit violation,
the engine will automatically stop upon the expiration of the selected time period.
Feature #23 - Steady/Flashing Lights During Remote Start
Steady (press “ arm/lock ” button to program) - DEFAULT
Flashing
(press “
disarm/unlock
” button to program)
This feature configures the systems’s operation of the vehicle’s parking lights when
the engine is running during remote start