Excalibur Water Systems Superflow Series, Installation And Operation Manual, Page: 34 / 39

5. Water Softener Hours Since Last Regeneration (Display Code)
The hours since last water softener regeneration will be saved and displayed.
Water softener display example = 67
Water softener range = 0 to 999 hours
- Depress the water softener extra cycle button.
6. Water Softner Volume Remaining:
The water softener volume remaining will be adjustable when displayed in this mode. The
water softener regeneration will occur if set to zero. For more than 10 seconds.
Water softener ranges = no display code 0 to 000 = 0 - 9,000
Water softener ranges = display code (T) T - 10 to 999 = 10,000 - 999,999
Water softener ranges = display code (L) L - 1.0 to L2.9 = 1,000,000 - 2,900,000
7. Water Softner Valve Position (No Display Code):
The water softener diagnostic display is for two softeners or more in a system. This will allow
you to see which water softener timer is programmed for the lead or lag water softeners.
This water softener diagnostic display is skipped for water softener systems types 4TC, 4FI
and 4FD.
Water softener first control valve setting (lead)
Water softener second, third, fourth control valve setting (lead)
- Depress the water softener extra cycle button.
8. Water Softener Software Version (Display Code SP):
The water softener electronic timer’s software program version number will be displayed.
Water softener display example SP3.0
- Depress the water softener extra cycle button to exit.
33