See Better with Smart Lights
WARNING AND SAFETY INSTRUCTIONS
Please make sure that you carefully read through this instruction sheet refer back to them during installation
to ensure your product is fitted safely and correctly before installing your LED Lighted Mirror fixture. Keep
these instructions for future use.
WARNING
Risk of Fire and Electric Shock
●
All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a
qualified electrician.
●
Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
●
Suitable for indoor use only. This product should be positioned well away from curtains and fabrics.
Never cover the mirror.
●
Regularly check the cord, the transformer and all other parts for damage. If any part is damaged the
product should not be used.
INSTALLATION SAFETY
●
Inspect the product immediately upon receipt for the transit damage or missing parts. Handle the
product with care and protect against knocks to all sides and edges of the glass.
●
Ensure there are no hidden pipes or cables in the wall before drilling.
●
Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.
CAUTION
The light source of this product is non‐changeable light diodes (LED). Do not disassemble the product, as the
light diodes can cause damage to the eyes.
NOTE: The important safeguards and instructions that appear in this manual are not meant to cover all
possible conditions and situations that may occur. It must be understood that common sense, caution and
care, are factors that can’t be built into any product. These factors must be supplied by the person(s) caring
for and operating the fixture. Do not install this fixture in hazardous locations.
